Peg It Board

  • industrial motors

    Exhaust/supply Ventilator, Axial Belt Drive Down Blast, Propeller Dia 36 In, Exhaust/supply Cfm @ 0.000 in Sp 9737, @ 0.125 in Sp 8373, Fan Rpm 755, Max Ambient Temp 104 F, Max Inlet Temp 104 Deg F, Voltage 115/208 230, 60 Hz, 1 Phase, Full Load Amps 11.0/5.5 5.5, Motor Hp 3/4, Bearing Type Regreaseable Pillow Block, Motor Type Capacitor Start capacitor Run, Height 37 In, Width 64 1/2 In, Max Depth 64 1/2 In, Mounting Position Horizontal, Frame Material Galv Steel, Propeller Material Steel Iec Motor Starter, All in one, Reversing, Magnetic, Coil Volts 24vac/dc, 50/60 Hz, Number Of Poles 3, 0.4 A Amps Ac, Aux. Contact Configuration 2no, Height (in.) 6.703, Width (in.) 3.543, Depth (in.) 6.506, Accessory Group Auxiliary Contacts, Manual Starter Accessory, Standards Ul 508, Csa, Iec, Ccc, Includes End Of Service Life Indicator And Removable Terminals Room A/c Motor, Permanent Split Capacitor, Open Air Over, Hp 1/2, Rpm 1625, Number Of Speeds 3, Volts 115, Full Load Amps 6.0, Nema 48y Frame, Body Dia 5 5/8 In, Service Factor 1.0, 60 Hz, Ring/stud Mount, Sleeve Bearings, Auto Thermal Protection, Shaft Dimensions 1/2 X 7 5/8 X 7 1/4 In, Rotation Ccwle, Ambient 40 C, Insulation Class A, Continuous Duty, Resilient Ring Dia 2 1/4 In, Stud Pattern 3 5/8 In, Length Less Shaft 5 5/8 In, Lead Length 36 In, Capacitor 2ge76 Or 2mdv4 Required Exhaust Ventilator, Axial Upblast, With Drive Package, Cfm @ 0.000 in Sp 15252, @ 0.125 in Sp 13326, 19.2 Sones @ 0.125 in Sp, Roof Mounting Location, Base Width 44 3/4 In, Base Length 44 3/4 In, Overall Height 33 In, Max. Inlet Temp 120 F, Motor Voltage 208 220/440, 3 Phase, Motor Hp 1, 547 Rpm, Propeller Dia 36 In, Application General Purpose Washdown Permanent Magnet Dc Motor, Totally Enclosed Fan Cooled, Hp 1/2, Rpm 1725, Armature Dc Voltage 180 Vdc, Nema Frame 56c, Mounting Face/base, Service Factor 1.00, Bearings Ball, Full Load Amps@nameplate Volts 2.8, Thermal Protection None Utility Pump, Self Priming, 1/2 Hp, 1 Phase, 115 Voltage, 7.5 Amps, Inlet 1 In Npt, Outlet 1 In Npt, Motor Enclosure Odp, 3450 Rpm, Motor Type Capacitor start, Aluminum Housing, Aluminum Impeller , Mechanical Seal, Seal Material Buna n, Carbon, Ceramic, Ss, Max. Liquid Temp. 180 F, Suction Lift 6', Max. Head 57', Max. Pressure 25 Psi, Max. Case Pressure (psi) 75 Psi, Max. Fluid Viscosity 31 Ssu, Max. Dia. Solids 1/8 In, Agency Compliance Motor Only Cus, Manufacturers Warranty Length 1 Year Duct Fan, Inline Centrifugal, Fits Duct Dia. (in.) 5, Cfm @ 0.000 in. Sp 206, Cfm @ 0.100 in. Sp 197, Max. Inlet Temp. (deg. F) 140, 120v, 60 Hz, 1 Phase, Max. Amps .708, Max. Wattage 85, Motor Rpm 2745, Housing Dia. (in.) 9 1/2, Length (in.) 9 1/2, Width (in.) 9 1/2, Height (in.) 7 5/8, Includes Mounting Bracket Blower, Backward Incline, Belt Drive, Unassembled, Wheel Diameter 18 1/4 Inches, Shaft Diameter 1 3/16 Inch, Airflow @ 0.250/1.500/3.000 Inches Static Pressure 6445/5621/4224 Cfm, Blower Speed 1670 Rpm, Includes 3hp 230/460 Volt 3 Phase Motor, Drives And Weatherproof Drive Cover,height 36 7/8 Inches,width 39 3/4 Inches,depth 31 3/4 Inches,inlet Diameter 19 5/8 Inches,outlet Height 19 5/8 Inches,outlet Width 14 1/4 Inches,max Inlet Air Temperature 250 Degrees F,cw Rotation Viewed From Drive Side Exhaust Fan, Standard Duty Belt Drive With Drive Package, Propeller Dia 36 In, Cfm @ 0.000 in Sp 12220, @ 0.125 in Sp 10328, Sones @ 0.000 in Sp @ 5 Ft 15.8, Max Inlet Temp 104 Deg F, Voltage 208 230/440, 60 Hz, 3 Phase, Motor Hp 1/2, Bearing Type Regreaseable Pillowblock, Fan Rpm 556, Height 40 In, Width 40 In, Max. Depth 22 In, Mounting Position Vertical Or Horizontal, Frame Material Galvanized Steel, Propeller Material Steel Oil Well Pumping Motor, 3 phase, Totally Enclosed Fan cooled, 5 Hp, 825 Nameplate Rpm, 256t Nema/iec Frame, Nema Frame 256t, Cw/ccw Rotation, Voltage 208 230/460, 16.0 14.5/7.25 Full Load Amps, 3 Phase, 60 Hz, Mounting Base, Mounting Position Horizontal, Base Rigid, Regreasable Ball Bearings, Frame Material Cast Iron, Max. Ambient Temp. 40 Degrees C, White, None, Service Factor 1.15, Ambient Temperature 40 Degrees C, 1 5/8 In. Shaft Dia., Shaft Length 4 In., Length Less Shaft 21 In.

    499 Pegs in this board



    Originally Pegged by

    Alm Universal XLR Mic Adapter with Audio Output E800 (4*Motor/ESC; 4 pair props; Accessories pack; Updater for ESC) ImmersionRC Vortex 250 Pro With Zipper case HP 95, C8766WN Genuine Original (OEM) ink cartridge, tri color Tubeaxial Fan, Smoke Exhaust, Belt Drive With Drive Package, Propeller Dia. (in.) 30, Cfm @ 0.000 in. Sp 12190, Sones @ 0.250 in. Sp @ 5 Ft. 41, Max. Inlet Temp. (deg. F) 500 Degrees For 4 Hours, 1000 Degrees For 15 Minutes, Max. Ambient Temp. (f) 200, Voltage 208 230/460, 60 Hz, 3 Phase, Full Load Amps 6.0 5.8/2.9, Motor Hp 2, Motor Type Hazardous Location, 3 phase, Motor Enclosure Totally Enclosed Fan Cooled, Max. Bhp 1.9, Motor Rpm 1730, Fan Rpm 1146, Bearing Type Ball CLEARANCE   Refurbished iPhone 6s Space Gray AT&T 16GB LG Optimus L90 Zakka Phone Wallet, Hot Pink 14 Inch Glow Sticks   Green LG Showtime Cell Phone Battery Charger, White Genuine EPSON T1285 Ink Cartridge Multipack Archival Methods Onyx Portfolio, 14.25 x 18.25 x 1.37 Electric Heater, Portable Salamander, Voltage 208, 60 Hz, 3 Phase, 42 Amps Ac, 14,500 Watts, Nominal 15 Kw, Output Btuh 51,200, Height 38 1/2 In, Width 27 In, Depth 21 13/32 In, Color Black And Orange, Air Temp Rise 194 F, Number Of Heat Settings 1, Built in Features Totally Enclosed Motor, No Slip Rubber Foot, Large Control Knob, Agency Compliance Csa, Includes Control Thermostat, Semi Pneumatic Wheels
    ElectronicsShop

    ElectronicsShop

    Pegged August 14, 2012

    Member Comments
    Related Pegs:




    loadingloading...