Peg It Board

  • Drones and Accessories

    Brinno Wall Mount for Time Lapse Cameras HPRC BEBSM Soft Case for Parrot Bebop and Accessories Phantom 2 Vision Plus Camera and Gimbal Replacement SteadiDrone MAVRIK   M E GO Complete Hardware Set Phantom 3 Professional with FPVLR Basic Antenna Kit Phantom 3 Propellers ToughCase X3 for Phantom 3 Professional and Advanced GO PROFESSIONAL CASES IMMERSION RC VORTEX FPV RACER CARRYING CASE DroneLite Carrying Pack

    255 Pegs in this board

    Originally Pegged by

    Brinno Wall Mount for Time Lapse Cameras 9450 Carbon Fiber Reinforced Self tightening Propellers (Composite Hub  Black with Yellow Stripes) Convertible Jet Pump, Material Of Construction Thermoplastic, 3/4 Hp, Voltage 115/230, Amps 10.8/5.5, Inlet 1 1/4 In. Npt , Outlet 1 In. Npt, Suction Lift (ft.) 80, Max. Case Pressure (psi) 136, Shut Off (psi) 61, Motor Enclosure Odp, Max. Inlet Pressure (psi) 75, Includes Pressure Gauge, Requires Ejector Sold Separately (see Accessories Depending On Application) VapeOnly Luft B Replacement Coil for Aura 5pcs(0.33ohm Cr) HTC Merge Cell Phone Battery Charger, White Output Filter, Dv/dt, Voltage 600v & Below, Amps 55, Hp 40, Phase Three, Enclosure Type Open, Watts Loss 145, Features Increase Motor Life And Performance, Function Reduce Voltage Overshoots And Reflective Wave Due To Dv/dt, Application Output Of Vfd, When Motor Lead Length Is 100 Ft. To 1000 Ft., Height 12 In., Width 8 In., Depth 9 In., Standards Ul Listed, Ce Certified Zenmuse X5   Balancing Ring for Panasonic 15mm f/1.7 ASPH Prime Lens Hoist/trolley, Single Speed, Capacity 2 Ton, Lift 20 Ft., Lift Speed 14 Fpm, Motor Hp 2.4, Voltage 230/460, 3 Phase, Amps @ Low Volts 11.8, 110v Control, Control Cord 16 Ft., Min. Between Hooks 22.4 In., Housing Length 25.4 In., Housing Width 16.4 In., Housing Depth 19.4 In., Reeving Single, Dc Current Brake, Friction Clutch Clutch, Aluminum Body, Standard, Oil Bath Lubrication, H4, Flange Width 3.23 To 6.02 In., Headroom 22.4 In., Min. Radius 31.5 In., Trolley Speed 14 Fpm Exhaust Fan Kit, Corrosion Resistant, Unassembled, Propeller Dia. 18 In, Cfm @ 0.000 in. Sp 4250, @ 0.050 in. Sp 4150, @ 0.125 in. Sp 3990, 52 Dba @ 7 Feet, Max. Ambient Temperature 140 Deg F, Voltage 460, 60 Hz, 3 Phase, Motor Type Three Phase, Motor Enclosure Totally Enclosed Air Over, Full Load Amps 1.01, Outside Dia. 5 3/8 In, Depth 7 3/4 In, Includes Propeller, Motor And 4 Motor Mounting Arms Fan Forced Electric Unit Heater, 50.0 / 37.5 Kw, 240/208 Volt, 3 Phase, 30 Hx, 26 5/8 Wx, 18 1/8 D In, Neutral Gray Powder Coated Finish, Mounting Position Vertical Or Horizontal, Built in Features Totally Enclosed Fan Motor, 4 Top And 4 Back Threaded Reinforced Holes For Field Mounting With 5/16 In Threaded Rod ( Not Included), Automatic Reset Linear Thermal Protector, Requires Field Supplied Control, 3/8 In 16 Threaded Rod For Ceiling Installation, Includes Adjustable Air Outlet Louvers TIGER MOTOR MT3515 15 400KV BRUSHLESS MOTOR Lexmark 33, 18C0033 Genuine Original (OEM) ink cartridge, color


    Pegged August 3, 2016

    Member Comments
    Related Pegs: