Peg It Board

  • industrial motors

    Motor Starter, Nema, Reversing, Nema Size 5, Nema Enclosure Type Open, Coil Volts 120, 50/60 Hz, Number Of Poles 3, 270 Amps Ac, Aux. Contact Configuration 1no, 75 Hp @ 3 Phase   208v, 100 Hp @ 3 Phase   230v, 200 Hp @ 3 Phase   460v, 200 Hp @ 3 Phase   575v, Height (in.) 25.00, Width (in.) 11.00, Depth (in.) 18.00, Standards Ul/ Csa, Includes Class 20 Solid State Ambient compensated Overload Relay And Instantaneous Magnetic Trip Mechanism, W/ Ground Fault Extra high Torque Farm Duty Motor, Capacitor start, Capacitor run, Totally Enclosed Fan cooled, 5 Hp, 1740 Nameplate Rpm, 230 Voltage, 184t Nema/iec Frame, Service Factor 1.15, 60 Hz, Base Mounting, Sealed Ball Bearings, Thermal Protection Manual, Full Load Amps 20.5, Ambient 40 C, Rotation Cw/ccw, Shaft Dia 1 1/8 In, Shaft Length 2 3/4 In, Insulation Class F Engine Lathe With Dro, 3 Motor Hp, 3 Phase, 230 Voltage, 60 Hz, Spindle Taper 5mt, Number Of Spindle Speeds 16, Tailstock Taper 3mt, Longitudinal Feed Rates 0.002 0.026, Overall Length 76 In., Overall Width 30 In., Overall Height 62 In., All Steel Helical Gears, Built And Tested To Din 8606 Lathe Standards High Pressure Blower, Radial Blade Belt Drive With Drive Package, Wheel Dia 12 1/2 In, Cfm @ 100 in Sp 978 @3050 Rpm, @ 200 in Sp 933 @3100 Rpm, Cfm @ 800 in Sp 639 @3450 Rpm, Cfm @ 900 in Sp 595 @3550 Rpm, 90 Dba @ 5 Feet , Max Inlet Temp 180 Deg F, Voltage 115/208 230, Single Phase, 60 Hz, Motor Hp 2, Housing Height 25 In, Housing Width 24 In, Housing Length 18 In, Discharge Height 5 In, Discharge Width 4 In, Inlet Dia 7 In Magnetic Motor Starter, Nema, Reversing, Nema Size 1, Nema Enclosure Type 1, Coil Volts 115, 50/60 Hz, Number Of Poles 3, 27 Amps Ac, Height (in.) 14, Width (in.) 4.94, Depth (in.) 4.59, Standards Ul/csa, Includes Overload Relay Exhaust Fan, Standard Duty, Propeller Dia. (in.) 22, Cfm @ 0.000 in. Sp 5629, Cfm @ 0.125 in. Sp 5153, Voltage 460, 60 Hz, 3 Phase, Full Load Amps 6.92, Motor Hp 0.87, Motor Type External Rotor, Totally Enclosed, Bearing Type Ball, Motor Rpm 1000, Max. Ambient Temp. (f) 100, Height (in.) 28 5/8, Width (in.) 28 5/8, Mounting Position Any, Frame Material Steel, Steel, Propeller Material Steel, Number Of Blades 7 Exhaust Ventilator, Centrifugal Upblast Assembled, Wheel Dia. 21 1/4 In., Wheel Type Backward Incline, Cfm @ 0.000 in. Sp 6806, @ 0.125 in. Sp 6628, Sones @ 0.125 in. Sp @ 5 Ft. 24, Max. Inlet Temp. 300 Deg. F, Motor Voltage 208 230/460, 60 Motor Hz, 3 Phase, Roof Mounting Location, Base Width 30 In., Base Length 30 In., Includes Nema 1 Junction Box Supply Fan, Standard Duty With Drive Package, Propeller Dia 48 In, Cfm @ 0.000 in Sp 21827, @ 0.125 in Sp 18907, @ 0.250 in Sp 13506, Sones @ 0.000 in Sp @ 5 Ft 19.4, Max Inlet Temp 104 Deg F, Voltage 115/208 230, 60 Hz, Single Phase, Motor Hp 1, Max Bhp 1.2, Bearing Type Regreaseable Pillowblock, Fan Rpm 429, Motor Enclosure Open Drip Proof, Height 54 In, Width 54 In, Max Depth 26 In, Mounting Position Vertical Or Horizontal, Number Of Blades 6 Motor Starter, Nema, Non Reversing, Nema Size 2, Nema Enclosure Type 12 And 3r, Coil Volts 240, 50/60 Hz, Number Of Poles 3, 45 Amps Ac, 10 Hp @ 3 Phase   208v, 15 Hp @ 3 Phase   230v, 25 Hp @ 3 Phase   460v, 25 Hp @ 3 Phase   575v, Width 9.28 In, Height 16.00 In, Depth 8.12 In, Aux Contact Configuration 1 No/1 Nc, Standards Ul/ Csa, Includes Melting Alloy Thermal Overload Relay And Instantaneous Magnetic Trip Mechanism Power Cutter, Blade Dia 9 In, Arbor Hole 1 In, 4875 Max. Rpm, Motor Type Gasoline, Hp 4.8, Engine Brand Husqvarna, Fuel Tank Capacity 24 Oz, Engine Displacement 71 Cc, Engine Displacement 4.3 Cu in, Depth Of Cut 2 3/4 In, Length 32 1/2 In, Width 10 1/4 In, Height 14 1/2 In, Weight 22.3 Lb, Bearing Type Double Sealed, For Use On Window And Door Openings, Cutting Pipes In Pipe Trenches, Includes Wet Cutting Kit, One Set Of 2etr1 Blades And A Breaking Tool

    499 Pegs in this board


    Originally Pegged by

    LifeProof NUUD iPhone 6s Case Atx Crystals Receiver Crystal AM Ch81 w/Cap Automatic Marine/rv Pump, Motor Voltage 12 Vdc, Length 8 1/8 Inches, Height 3 3/4 Inches, Width 3 1/4 Inches, Diaphragm, 156 Gph, Portable Water Supply Phantom 3 Advanced (Refurbished Unit) Epson T096420 / 96 remanufactured ink cartridge   yellow PC Components, Desktop PCs, Laptops, LCD TVs & Computer Hardware Phantom 4 EVERYTHING YOU NEED KIT Zenmuse Z3 AUTEL ROBOTICS   X STAR DRONE WITH 4K CAMERA AND WI FI HD LIVE VIEW (ORANGE or WHITE) Inducer Motor, For Use With 2wxx3, 2wxx4, 2wxx5, 2wxx2, 2wxx1, 2wxx6, 2wxx7, 2wxw4, 2wxw6, 2wxw7, 2wxw5, 2wyn1, 2wxw8, 2wxw9 DJI Phantom 3 Drone | Uncrate KODAK No. 10 black & colour ink cartridge pack
    ElectronicsShop

    ElectronicsShop

    Pegged August 14, 2012

    Previous Pin
    Previous
    Condenser Fan Motor, Permanent Split Capacitor, Enclosed Air over, 1/6 Hp, Nameplate Rpm 1075, Voltage 208 230, Full Load Amps 0.9 1.0, 60 Hz, 48y Nema/iec Frame, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number Of Speeds 1, Stud Mounting, Sleeve Bearings, Thermal Protection Auto, Rotation Ccwle, Body Dia 5 5/8 In, Length Less Shaft 3 7/8 In, Shaft Dia 1/2 In, Shaft Length 3 3/4 In, Capacitor Required 2mdv4, Oem Replacement For Goodman/janitrol
    Next
    Previous Pin
    Previous
    Next Peg
    Next
    Member Comments

    Related Pegs:


    loadingloading...