Peg It Board
  • industrial motors

    Motor Starter, Nema, Reversing, Nema Size 1, Nema Enclosure Type 1, Coil Volts 208, 50/60 Hz, Number Of Poles 3, 27 Amps Ac, 7.5 Hp @ 3 Phase   208v, 7.5 Hp @ 3 Phase   230v, 10 Hp @ 3 Phase   460v, 10 Hp @ 3 Phase   575v, Width 7.53 In, Height 11.88 In, Depth 11.88 In, Aux Contact Configuration 1 No/1 Nc, Standards Ul/ Csa, Includes Melting Alloy Thermal Overload Relay And Instantaneous Magnetic Trip Mechanism Motor Starter, Nema, Reversing, Nema Size 5, Nema Enclosure Type Open, Coil Volts 120, 50/60 Hz, Number Of Poles 3, 270 Amps Ac, Aux. Contact Configuration 1no, 75 Hp @ 3 Phase   208v, 100 Hp @ 3 Phase   230v, 200 Hp @ 3 Phase   460v, 200 Hp @ 3 Phase   575v, Height (in.) 25.00, Width (in.) 11.00, Depth (in.) 18.00, Standards Ul/ Csa, Includes Class 20 Solid State Ambient compensated Overload Relay And Instantaneous Magnetic Trip Mechanism, W/ Ground Fault Exhaust Fan, Medium Duty Belt Drive With Drive Package, Propeller Dia 24 In, Cfm @ 0.000 in Sp 6950, @ 0.125 in Sp 6216, @ 0.250 in Sp 4806, Sones @ 0.000 in Sp @ 5 Ft 14.7, Max Inlet Temp 104 Deg F, Voltage 115/208 230, 60 Hz, 1 Phase, Motor Hp 1/2, Bearing Type Regreaseable Cast Pillow Block, Fan Rpm 740, Height 28 In, Width 28 In, Max Depth 18 In, Mounting Position Vertical Or Horizontal, Frame Material Galvanized Steel, Propeller Material Fabricated Steel Exhaust Ventilator, Centrifugal Upblast With Drive Package, Cfm @ 0.000 in Sp 2256, @ 0.250 in Sp 2128, 17.4 Sones @ 0.250 in Sp, Roof Mounting Location, Base Width 22 In, Base Length 22 In, Overall Height 26 7/8 In, Max. Inlet Temp. 300 Deg. F, Motor Voltage 208 220/440, 3 Phase, Motor 1/2 Hp, 1645 Rpm, Wheel Dia 13 1/4 In, Application General/kitchen, Includes Nema 1 Junction Box Plenum Fan, Belt Drive With Drive Package, Wheel Dia 15 In, Cfm @ 0.250 in Sp 2553, @ 0.500 in Sp 2431, @ 0.750 in Sp 2282, Sones @ 0.250 in Sp @ 5 Ft. 18.0, Sones @ 1.500 in Sp @ 5 Ft. 17.7, Max Inlet Temp 104 Deg F, Voltage 208 230/460, 60/50 Hz, 3 Phase, Full Load Amps 2.8 2.8/1.4, Motor Hp 3/4, Shaft Centerline Height 9 In, Frame Height 18 In, Frame Width 18 In, Frame Depth 18 In, Belt Provided Is For Typical Motor Mounting Location, Includes Drive Package Ac Gearmotor, Parallel Shaft, Nameplate Rpm 7.0, Full Load Torque 18 In. lbs., Voltage Rating 115, Input Hp 1/100, Gear Ratio 439:1, Enclosure Open, Rotation Reversible, Output Shaft Horizontal Only Mounting Condenser Fan Motor, Permanent Split Capacitor, Totally Enclosed Air over, 1/6 1/3 Hp, Number Of Speeds 1, Nameplate Rpm 1075, Nema/iec Frame 48, Voltage 208 230, 60 Hz, Full Load Amps 2.6, Stud Mounting, Auto Thermal Protection, Insulation Class B, Service Factor 1.00, Ball Bearings, Ambient 70 C, Cw/ccw Rotation, Length Less Shaft 5 5/8 In, Shaft Dia 1/2 In, Shaft Length 6 1/2 In, Body Dia 5 5/8 In Floor Drill Press, Swing 17 In, Motor Hp 3/4, Voltage 115, 12 Amps Ac, Capacity Cast Iron 5/8 In, Capacity Steel 5/8 In, Spindle Speeds 16, 200 3630 Rpm, Chuck Size 5/8 In, Spindle Taper Mt2, Spindle Travel 3 1/4 In, Spindle To Table 25 5/8 In, Quill Dia 2 In, Table Work Surface 14 1/4 X 14 1/4 In, Belt Table Tilt Angle Left/right 45 Deg, Table Slots 5/8 X 1 3/16 In, Overall Height 64 7/8 In, Overall Width 14 5/16 In, Overall Depth 28 5/8 In, Includes Laser, Hex Wrenches, Aaa Batteries Blower, Unassembled, Double Inlet Forward Curve, Belt Drive, With Drive Package, Wheel Dia. (in.) 18 1/8, Wheel Width (in.) 18, Cfm Range 5600 To 4350 @ 0.125 in Sp To 0.250 in Sp, Max. Inlet Temp. (deg. F) 150, Max. Ambient Temp. (f) 104, Voltage 208 230/460, Hz 50/60, Phase 3, Full Load Amps 2.8 2.8/1.4, Motor Hp 3/4, Bearing Type Ball, Housing Height (in.) 30 11/16, Housing Width (in.) 21 7/8, Housing Depth (in.) 27, Discharge Height (in.) 11 3/4, Discharge Width (in.) 21 7/8 Condenser Fan Motor, Permanent Split Capacitor, Totally Enclosed Nonventilated, 1/4 Hp, Nameplate Rpm 830, Voltage 208 230, Full Load Amps 1.5, Nema Frame 48, Service Factor 1.0, 60 Hz, Stud/band Mounting, Sleeve Bearings, Auto Thermal Protection, Rotation Cwse, Insulation Class B, Ambient 40 C, Number Of Speeds 1, Shaft Dia 1/2 In, Shaft Length 1 1/2 In, Length Less Shaft 5 7/16 In, Stud Pattern 3 11/16 X 3 11/16 In, Capacitor Required 2mdv4, Replaces Goodman 5kcp39jfy832s, Ge 5kcp39jfv504s

    499 Pegs in this board


    Originally Pegged by

    CLEARANCE   Refurbished iPhone 6s Space Gray GSM UNLOCKED 128GB Inspire 1   100W Power Adaptor (without AC Cable) Amazon Kindle Fire HD 8.9 Cell Phone Battery Charger, White XTM Ball Ends (15) X Cellerators Phantom 4   Car Charger Kit Osmo   Extension Rod Movavi Video Converter 3D   From this window you will be able to ... Circuit Breaker, Bolt On, Air Rating 10ka, Standard Circuit Breaker Type, Number Of Poles 3, Voltage 240vac, 80 Amps, 3 Phase, Any Phase Connection, Min Wire Size 6 Awg, Max Wire Size 1/0 Awg, Length 3.28 In, Width 3.00 In, Depth 2.38 In, Box Lug Terminal Connection, For Use With Ge Aq Lighting Panels, Frame Size Thq, High Amp Trip Setting 800 Fixed, Standards Ul/ Csa Adam Montreal Ivory Nevada Electric Fire Shisha Pipes, Our range of Electronic Shishas stunning flavours and Monogram SMODD Double Heated Overblanket Refurbished Apple iPad Air Verizon Silver 128GB (MF019LL/A)
    ElectronicsShop

    ElectronicsShop

    Pegged August 14, 2012

    Previous Pin
    Previous
    Dc Gearmotor, Right Angle, Single Shaft, Rpm 150, Full Load Torque 63 In. lbs., 12vdc, Overhung Load 175 Lb., Input Hp 1/8, Gear Ratio 10:1, Full Load Amps 16,totally Enclosed Non Ventilated,thermal Protection None, Ambient 40 C, Reversible Rotation, All position Mounting, Pmdc Motor, Die Cast Zinc And Steel Housing, Die Cast Zinc Gear Case, Powdered Metal Bevel And Steel Spur Gears
    Next

    Related Pegs:

    loadingloading...