Peg It Board
  • industrial motors

    C face Right Angle Speed Reducer, Nominal Output Speed 35 Rpm, Input Rpm 1725 1750, Nema Frame 56c, Overhung Load 875 Pounds, Nominal Ratio 50:1, Output Torque @ 1/3 Hp 372 Inch Pounds, Output Torque @ 1/2 Hp 581 Inch Pounds, Worm Center Distance 2.06 Inches, Single Output Shaft Assembly, Output Shaft Left Hand Exit Facing Input, Mounting Any Position Except Input Motor Shaft Up Magnetic Motor Starter, Non Reversing, Nema Size 0, Nema Type Open, Number Of Poles 3, Power Rating @ 208 230 Vac Three Phase 3 Hp, Power Rating @ 460 Vac Three Phase 5 Hp, Length 6.77 Inches, Height 4.22 Inches, Width 3.50 Inches, 208 Vac Coil, Three Thermal Units Required Sold Separately Regenerative Blower, Inlet/outlet (in) 1 (f)npt, 0.17 Hp, Voltage 115/230, 1 Phase, 1.5/.75 Full Load Amps, Max Pressure 27.5 In Wc, Open Flow Positive Pressure 27 Cfm, Max Vacuum H20 26 In Wc, Min Cfm 3.5, Scfm @ 10 Pressure In./water 20.5, Scfm @ 10 Vacuum In./water 20, Max Ambient Temp 104 F, Aluminum Alloy Base Material, Aluminum Alloy Housing, Aluminum Alloy Impeller Material, Tenv Motor Enclosure, Overall Length 8 11/32 In, Overall Height 8 1/2 In, Overall Depth 7 7/8 In Motor Starter, Nema, Non Reversing, Nema Size 4, Nema Enclosure Type 12 And 3r, Coil Volts 240, 50/60 Hz, Number Of Poles 3, 135 Amps Ac, 40 Hp @ 3 Phase   208v, 50 Hp @ 3 Phase   230v, 100 Hp @ 3 Phase   460v, 100 Hp @ 3 Phase   575v, 16.80 Height (in), Width 10.70 In, Depth 10.50 In, Aux Contact Configuration 1 No/1 Nc, Standards Ul/ Csa, Includes Melting Alloy Thermal Overload Relay And Instantaneous Magnetic Trip Mechanism Exhaust Fan, Medium Duty Belt Drive With Drive Package, Propeller Dia 24 In, Cfm @ 0.000 in Sp 6950, @ 0.125 in Sp 6216, @ 0.250 in Sp 4806, Sones @ 0.000 in Sp @ 5 Ft 14.7, Max Inlet Temp 104 Deg F, Voltage 115/230, 60 Hz, 1 Phase, Motor Hp 1/2, Bearing Type Regreaseable Cast Pillow Block, Fan Rpm 740, Height 28 In, Width 28 In, Max Depth 18 In, Mounting Position Vertical Or Horizontal, Frame Material Galvanized Steel, Propeller Material Fabricated Steel Blower, Unassembled, Double Inlet Forward Curve, Belt Drive, With Drive Package, Wheel Dia. (in.) 18 1/8, Wheel Width (in.) 18, Cfm Range 5600 To 4350 @ 0.125 in Sp To 0.250 in Sp, Max. Inlet Temp. (deg. F) 150, Max. Ambient Temp. (f) 104, Voltage 208 230/460, Hz 50/60, Phase 3, Full Load Amps 2.8 2.8/1.4, Motor Hp 3/4, Bearing Type Ball, Housing Height (in.) 30 11/16, Housing Width (in.) 21 7/8, Housing Depth (in.) 27, Discharge Height (in.) 11 3/4, Discharge Width (in.) 21 7/8 Exhaust Fan Kit, Corrosion Resistant, Unassembled, Propeller Dia. 18 In, Cfm @ 0.000 in. Sp 3350, @ 0.050 in. Sp 3275, @ 0.125 in. Sp 3150, 52 Dba @ 7 Feet, Max. Ambient Temperature 140 Deg F, Voltage 120, 60 Hz, 1 Phase, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Air Over, Full Load Amps 2.5, Outside Dia. 5 3/8 In, Depth 7 3/4 In, Includes Propeller, Motor And 48 Frame Motor Mount Jet Pump Motor, Capacitor start, Capacitor run, Open Dripproof, 1 1/2 Hp, 3450 Rpm, 115/230 Volts, 56j Nema Frame, Service Factor 1.30, Full Load Amps 15.8/7.9, Ambient 50 C, Insulation Class B, Thermal Protection Auto, High Efficiency, Face Mounting, Locked Double sealed Ball On Shaft End Bearings, Rotation Ccw, Black Finish Tubeaxial Fan, Belt Drive With Drive Package, Propeller Dia. (in.) 60, Cfm @ 0.000 in. Sp 40,079, Sones @ 0.250 in. Sp @ 5 Ft. 37, Max. Inlet Temp. (deg. F) 200, Max. Ambient Temp. (f) 104, Voltage 208 230/460, 60 Hz, 3 Phase, Full Load Amps 14.8 13.4/6.7, Motor Hp 5, Motor Type 3 phase, Motor Enclosure Totally Enclosed, Max. Bhp 4.79, Motor Rpm 1725, Fan Rpm 493, Bearing Type Ball, Shaft Dia. (in.) 1 11/16, Height (in.) 66 3/4, Width (in.) 64 1/4, Max. Depth (in.) 43 3/8 Room Air Conditioner Motor, Permanent Split Capacitor, Open Air over, 1/2 Hp, 1075 Rpm, Number Of Speeds 2, 230 Volts, 4.0 Full Load Amps, 48y Nema Frame, Body Diameter 5 5/8 In, Service Factor 1.0, 60 Hz, Cradle Mounting, All angle Sleeve Bearings, Auto Thermal Protection, Shaft Diameter 1/2 In, Shaft Length 7 In, Ccwle Rotation, Ambient 40 C, Insulation Class B, Resilient Ring Diameter 2 1/2 In, Length Less Shaft 5 7/8 In, Capacitor Included

    499 Pegs in this board


    Originally Pegged by

    GSM alarm system self monitoring no monthly monitoring fee. Work with telephone line and GSM SIM card. Self monitored alarm system without contract. Receiving alarm via audio call and text message (SMS). Support smart remote control in anywhere. LG Venice 2in1 Phone Stand and Credit Card Holder, Blue CLEARANCE   Refurbished iPhone 6 Space Gray T Mobile 16GB (MG542LL/A) (A1549) Vertical Band Saw, Wood Cutting, Motor Voltage 115/230, 3/4 Hp, 11.0/5.5 Amps Ac, Speeds (fpm) 2000/2600, Max Thickness Of Cut 6 1/4 In, Cutting Angle 45 Deg, Miter Capacity 90 Deg, Max Blade Length 93 In, Max Blade Width 3/4 In, Min Blade Width 1/8 In, Blade Thickness 0.025 In, Overall Height 65 In, Overall Width 25 In, Overall Depth 21 In, Includes Open Steel Stand, Aluminum Wheels, Wood Cutting Blade, Chip Chute And Exhaust Port, Miter Gauge Phantom 3 Standard with Extra Battery New Dell Inspiron 14z Ultrabook Kyocera Kona S2150 Zakka Phone Wallet, Hot Pink E cig DIY Tool Accessories Kit V2(Black) UD Apro 16 Starter Kit 800mAh(Black) Atx Crystals Receiver Crystal FM DC Ch68 w/Cap DJI Focus   Data Cable (2m) Bearing Kit for Cobra 2204 Motors (2 Pcs)
    ElectronicsShop

    ElectronicsShop

    Pegged August 14, 2012

    Previous Pin
    Previous
    Condenser Fan Motor, Permanent Split Capacitor, Enclosed Air over, 1/6 Hp, Nameplate Rpm 1075, Voltage 208 230, Full Load Amps 0.9 1.0, 60 Hz, 48y Nema/iec Frame, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number Of Speeds 1, Stud Mounting, Sleeve Bearings, Thermal Protection Auto, Rotation Ccwle, Body Dia 5 5/8 In, Length Less Shaft 3 7/8 In, Shaft Dia 1/2 In, Shaft Length 3 3/4 In, Capacitor Required 2mdv4, Oem Replacement For Goodman/janitrol
    Next

    Previous Pin
    Previous
    Next Peg
    Next

    Related Pegs:

    loadingloading...