Peg It Board
  • industrial motors

    Blower, Single Inlet, Belt Drive, Forward Curve With Drive Package, Wheel Dia. 9 In., Cfm @ 0.125 in. Sp #, Cfm @ 0.250 in. Sp #, Cfm @ 0.375 in. Sp #, Cfm @ 0.500 in. Sp #, Cfm @ 0.750 in. Sp #, Cfm @ 1.000 in. Sp #, Dba @ 5 Feet 64, Max. Inlet Temp. 250 Deg. F, Voltage 208 230/460, Three Phase, 60 Hz, Motor Hp 1 1/2, Height 17 In., Width 11 In., Depth 15 In., Inlet Dia. 9 In., Discharge Height 10 3/4 In., Discharge Width 6 1/2 In., Includes Weather Proof Drive Cover Rotary Gear Pump, Close Coupled, 3/4 Hp, 1 Phase, Voltage 115/230, 11.2/5.6 Amps Ac, Motor Frame 56c, Motor Enclosure Odp, Port Size 1/4 In., Suction Lift 3.5 Ft., Gpm @ Freeflow 4.8, Gpm @ 100 Psi 4.4, Max. Pressure (psi) 125, Piston Relief Valve Blower, Direct Drive Forward Curve, Wheel Dia 5.9 In, Cfm @ 0.500 in Sp 550, Cfm @ 0.750 in Sp 540, 72 Dba @ 5 Feet, Max Inlet Temp 140 Deg F, Voltage 230/460, 50/60 Hz, 3 Phase, Full Load Amps 1.6/0.8, Motor Hp 1/2, Height 16.13 In, Width 14.16 In, Depth 17.04 In, Inlet Dia 4.92 In, Outlet Dia 4.92 In, Housing Material Polypropylene, Includes Motor Mounting Base Direct drive Blower Motor, Permanent Split Capacitor, Open Air over, 3/4 Hp, Nameplate Rpm 1075, Voltage 277/230, Full Load Amps 3.6, 60/50 Hz, 1 Phase, Nema/iec Frame 48, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number Of Speeds 4, Ring/stud/band Mounting, Ball Bearings, Auto Thermal Protection, Cw/ccw Rotation, 68.2 Efficiency, 13 7/16, Shaft Dia. 1/2 In., Shaft Length 6 1/2 In. Single Inlet Forward Curve Direct Drive Blower, Wheel Diameter 6 5/16 Inches, Wheel Width 2 1/2 Inches, Wheel Bore 1/2 Inch, Inlet Diameter 6 Inches, Outlet Height 7 3/8 Inches, Outlet Width 4 1/4 Inches, Overall Height 15 Inches, Overall Width 14 Inches, Overall Depth 11 Inches, Cw Rotation Viewed From Drive Side, Maximum Inlet Air Temperature 180 Degrees F, Without Motor, Recommended Motor Power Rating 1/4 Hp @ 1725 Rpm Power Cutter, Blade Dia 9 In, Arbor Hole 1 In, 4875 Max. Rpm, Motor Type Gasoline, Hp 4.8, Engine Brand Husqvarna, Fuel Tank Capacity 24 Oz, Engine Displacement 71 Cc, Engine Displacement 4.3 Cu in, Depth Of Cut 2 3/4 In, Length 32 1/2 In, Width 10 1/4 In, Height 14 1/2 In, Weight 22.3 Lb, Bearing Type Double Sealed, For Use On Window And Door Openings, Cutting Pipes In Pipe Trenches, Includes Wet Cutting Kit, One Set Of 2etr1 Blades And A Breaking Tool Iec Motor Starter, All in one, Reversing, Magnetic, Coil Volts 110 240vac/dc, 50/60 Hz, Number Of Poles 3, 0.4 A Amps Ac, Aux. Contact Configuration 2no, Height (in.) 6.704, Width (in.) 3.543, Depth (in.) 6.507, Accessory Group Auxiliary Contacts, Manual Starter Accessory, Standards Ul 508, Csa, Iec, Ccc, Includes End Of Service Life Indicator And Removable Terminals Exhaust Fan, Corrosion Resistant, Medium Performance, Propeller Dia. (in.) 22, Cfm @ 0.000 in. Sp 6000, Max. Ambient Temp. (f) 140, Voltage 240, 60 Hz, 1 Phase, Full Load Amps 2.6, Full Load Watts 650, Bearing Type Sealed Ball, Motor Rpm 1090, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Air over, Motor Insulation Class F, Thermal Protection Automatic, Height (in.) 27 9/16, Width (in.) 27 9/16, Max. Depth (in.) 13 13/16, Sq. Opening Required (in.) 23 7/8 Hazardous Location Motor, 3 phase, Totally Enclosed Fan cooled, 7 1/2 Hp, Nameplate Rpm 3530, Voltage 208 230/460, 60/50 Hz, Full Load Amps 20.0 19.0/9.5, Service Factor 1.15, Nema Frame 213/5t, Base Mounting, Double shielded Ball Bearings, Thermal Protection None, Ambient 40 C, Insulation Class F, Cw/ccw Rotation, Shaft Dia 1 3/8 In, Shaft Length 3 3/8 In, Length Less Shaft 16 1/4 In, Continuous Duty, Frame Material Cast Iron, Nominal Efficiency 90.2, Hazardous Location Class 1 C,d / 2 F,g Motor Starter, Nema, Non Reversing, Nema Size 1, Nema Enclosure Type 1, Coil Volts 120vac, 60 Hz, Number Of Poles 3, 27 Amps Ac, Aux. Contact Configuration 1no, 1/6 Hp @ 3 Phase   208v, 1/6 Hp @ 3 Phase   230v, 1/3 Hp @ 3 Phase   460v, 1/2 Hp @ 3 Phase   575v, Height (in.) 10.97, Width (in.) 6.41, Depth (in.) 5.03, Standards Ul/csa

    499 Pegs in this board


    Originally Pegged by

    Starbeam   SCT Base with Flip MirrorStarbeam's unique flip mirror feature provides comfort and flexibility for viewing at any angle from straight through to 90. Viewed straight through you see the natural sky with a 10 arc minute (1/3 Moon diameter) Elite Premium Refurbished Apple iPhone 4S T Mobile Black 32GB XTM Center Drive Shaft Rage Aluminum Miniature Lamp, Trade Number 12psb, T2 Lamp Shape, Tel. Slide No. 5 Lamp Base, Primary Application Telephone, Voltage 12, 2 Amps/watts, Average Life 12,000 Hrs., Max. Overall Length 1.11 In., Standards Meets 2012 Lighting Legislation Energy Standards Elite Premium Refurbished iPhone 5S AT&T Silver 16GB (ME306LL/A) (A1533) Portable Home Security Kangertech T3D Dual Coil Clearomizer 2.2ml 5pcs(Red, 1.5ohm) LifeProof iPad Mini 1, 2, 3 Case: NUUD 50 Hz Motor, 3 phase, Totally Enclosed Fan cooled, 3/4 Hp, Number Of Speeds 1, Nameplate Rpm 1425, Voltage 220/380/440, Hz 50, 3 Phase, Full Load Amps 3.2/1.85/1.6, Nema/iec Frame 56c, Mounting Face, Thermal Protection None, Insulation Class B, 1.15 Service Factor, Bearings Ball, Rotation Cw/ccw, Ambient Temperature 40 Degrees C, Shaft Dia. 5/8 In., Shaft Length 1 7/8 In., Length Less Shaft 9 3/16 In., Overall Length 11 1/16 In., Rpm Range 1400 1800 FATSHARK 600TVL FPV TUNED CMOS CAMERA Weather Hood, Height 21.65 In, Width 15.74 In, Depth 14.87 In, Purple Polypropylene Construction Material, Includes Mounting Hardware, Protects Motor Against Weather, For Use With 3mpu7 To 3mpu9, 3mpv1 To 3mpv9, 3mpw1 To 3mpw9, 3mpx1 LifeProof Adhesive Mounting Disk
    ElectronicsShop

    ElectronicsShop

    Pegged August 14, 2012


    Related Pegs:

    loadingloading...